LM series vertical roller mill is based on advanced home& abroad technology, combined with years of experience in the production of grinding mill. It is an ideal equipment that integrates crushing, drying, grinding and conveying all together.
LM Roller Vertical Mill is a new kind of large scale power mill which is designed specially to solve the problems of low capacity and high consumption of industry mills. With a decade of years’ research of mills, Vertical Roller Mill is designed and manufactured based on our advanced design idea, and in combination with the European technology and the market demand. It adopts reliable structure and reasonable process flow, integrated with drying ,milling, classifier , elevator. Especially ,it can fully meets the requirement of clients in the high production of powder and its main technical and economy indicator reaches the international level.

Application:

LM series vertical grinding machine can be widely used in cement, power,metallurgy, chemical and nonmetalliferous ore industries. It is used to grind lumpy, granular and powdery material to the required size.

Working Principle:

The motor dives the grinding table to turn through the speed reducer. At the same time, hot air comes into the roller mill from the air inlet. The materials fall down the centre of grinding table from the feeder. Because of the centrifugal force, the materials move to the edge of grinding table from the centre .The materials are crushed by the grinding roller when they passes the groove on the grinding table. The crusher materials continue to move to the edge of the grinding table until they are taken away by the airstream. Then the bigger materials fall down the grinding table and the process of crushing continues. When the materials in the airstream pass the separator on the top of the mill, the materials fall down the grinding table from the taper filler under the force of guide leaf blade. The fine powder comes out with the airstream, and is gathered by the dust catcher of the system. The powder gathered is the final product of roller mill. In the process of the contact of airstream , the materials are dried to meet the clients’ need at the proper moisture.　Through the adjustment of the angle between the separator and the leaf of wind’s direction (not suitable to the small type of vertical mill), and also the speed of the separator rotor, it can reach the proper fineness of the materials.

Technical advantages:

1)The time materials stayin the machine body is short ,which can reduce the repeating grinding and have a stable quality.

2)the adjustable dry air temoeture,and high drying ability ,energy-saving.

3)the non-direct contacting equipment installed on the roller shells and the grinding liner can avoid the damage compact and strong shaking.

4)the machine merges the crushing ,drying,grinding ,and classifying into a single whole .

5) the grinding roller and the liner adopts the high-quality materials ,which can reduce the abrasion and increase the service life .

6)the whole seal of the equipment makes the system work in a negative environment with no dust leaking and a clean environment.

Technical Data:
LM Vertical Ore Mill Specification

Model		LM130K	LM150K	LM170K	LM190K	LM220K	LM240K
Turnplate diameter (mm)		1300	1500	1700	1900	2200	2400
Capacity (t/h)		10~30	13~40	18~57	23~72	36~114	41~128
Final product size	μm	170~45	170~45	170~45	170~45	170~45	170~45
	mesh	80~325	80~325	80~325	80~325	80~325	80~325
Final product water percentage		≤1%	≤1%	≤1%	≤1%	≤1%	≤1%
Max. input size (mm)		<38	<40	<42	<45	<50	<55
Best water percentage of raw material		<4%	<4%	<4%	<4%	<4%	<4%
Drying needed if water percentage is more than		<15%	<15%	<15%	<15%	<15%	<15%
Input wind temperature (℃)		<350	<350	<350	<350	<350	<350
Output wind temperature (℃)		70~95	70~95	70~95	70~95	70~95	70~95
Main motor power (KW)		185~220	250~280	355~400	450~500	710~800	800~900
Overall dimension	L mm	3500	4200	4700	8500	10200	11700
	W mm	3400	3900	4500	5600	6700	7700
	H mm	5800	7100	8300	8800	10600	12200
Weight (t)		48	75	90	100	125	160

Note: 1. Input material should be brittle material with Mohs hardness not more than seven.
2. Hot air is needed only when there is a requirement that water percentage of final product should be less than raw material.
3. If the material is hard to grind, motor power take large value.

LM Vertical Coal Mill Specification

Model		LM130M	LM150M	LM170M	LM190M	LM220M	LM240M
Turnplate diameter (mm)		1300	1500	1700	1900	2200	2400
Capacity (t/h)		10~15	16~22	20~28	26~35	35~45	40~50
Coal powder fineness (R0.08)		<15%	<15%	<15%	<15%	<15%	<15%
Coal powder water percentage		<1%	<1%	<1%	<1%	<1%	<1%
Max. input size (mm)		<38	<40	<42	<45	<50	<55
Input material water percentage		<15%	<15%	<15%	<15%	<15%	<15%
Input wind temperature (℃)		<350	<350	<350	<350	<350	<350
Output wind temperature (℃)		75~95	75~95	75~95	75~95	75~95	75~95
Raw coal Hardgrove grindability index (HGI)		>55	>55	>55	>55	>55	>55
Main motor power (KW)		185	250	315	400	500	560
Overall dimension	L mm	3500	4200	4700	8500	10200	11700
	W mm	3400	3900	4500	5600	6700	7700
	H mm	5800	7100	8300	8800	10600	12200
Weight (t)		46	75	94	100	122	157

If there is change of the above specification, it subjects to the newest products' specifications.

you can leave you message:

Name:	*
Email:	*
Country:	*
Tel:
Company:
Inquiry:	*